Welcome to a free 30 day trial of GpsGate.com VehicleTracker!
Track your SANAV device in a matter of minutes with thisguide!
If you are using another device then please click here for more information.
New to GPS tracking? GpsGate.com VehicleTracker is a web based vehicle tracking solution, you find more information This trial is free and after 30 days your account will be closed. If you wish to continue using GpsGate.com VehicleTracker after 30 days you find purchase information here!
When you have entered the required information an configuration SMS:s will be sent to your tracking device. You will also receive an email with your login details to the email address you specify.
Step 1.
First of all you have to select the tracking device you are using.
Select your device:
Error: you must select a device
Device description
Step 2.
Prepare your device.
Prepare your device.
Please go through the following preparation steps to make your Sanav CT-24 device ready for configuration.
Check the credit on your SIM card and verify that GPRS has been activated by your telecom operator. Insert your device SIM card in a mobile phone and try the web browser to test this.
Disable the PIN code control on the SIM card. You can insert the SIM card in a mobile phone and follow the instructions in the phone manual to do this.
Disconnect the battery when you insert your SIM card into the device.
Write down the IMEI number of your device, it is found inside the battery compartment.
Make sure the battery is charged, turn the device on and place it where you have a good GPS signal, e.g. in a window or outdoors.
* NOTE! device user name must be set to "username" and device password must be set to "0000". Those are the default values on a new Sanav device.
Prepare your device.
Please go through the following preparation steps to make your Sanav CT-58 device ready for configuration.
Check the credit on your SIM card and verify that GPRS has been activated by your telecom operator. Insert your device SIM card in a mobile phone and try the web browser to test this.
Disable the PIN code control on the SIM card. You can insert the SIM card in a mobile phone and follow the instructions in the phone manual to do this.
Disconnect the battery when you insert your SIM card into the device.
Write down the IMEI number of your device, it is found inside the battery compartment.
Make sure the battery is charged, turn the device on and place it where you have a good GPS signal, e.g. in a window or outdoors.
* NOTE! device user name must be set to "username" and device password must be set to "0000". Those are the default values on a new Sanav device.
Prepare your device.
Please go through the following preparation steps to make your Sanav CT-58A device ready for configuration.
Check the credit on your SIM card and verify that GPRS has been activated by your telecom operator. Insert your device SIM card in a mobile phone and try the web browser to test this.
Disable the PIN code control on the SIM card. You can insert the SIM card in a mobile phone and follow the instructions in the phone manual to do this.
Disconnect the battery when you insert your SIM card into the device.
Write down the IMEI number of your device, it is found inside the battery compartment.
Make sure the battery is charged, turn the device on and place it where you have a good GPS signal, e.g. in a window or outdoors.
* NOTE! device user name must be set to "username" and device password must be set to "0000". Those are the default values on a new Sanav device.
Prepare your device.
Please go through the following preparation steps to make your Sanav GC-101 device ready for configuration.
Check the credit on your SIM card and verify that GPRS has been activated by your telecom operator. Insert your device SIM card in a mobile phone and try the web browser to test this.
Disable the PIN code control on the SIM card. You can insert the SIM card in a mobile phone and follow the instructions in the phone manual to do this.
Disconnect the battery when you insert your SIM card into the device.
Write down the IMEI number of your device, it is found inside the battery compartment.
Make sure the battery is charged, turn the device on and place it where you have a good GPS signal, e.g. in a window or outdoors.
* NOTE! device user name must be set to "username" and device password must be set to "0000". Those are the default values on a new Sanav device.
Prepare your device.
Please go through the following preparation steps to make your Sanav GX-101 device ready for configuration.
Check the credit on your SIM card and verify that GPRS has been activated by your telecom operator. Insert your device SIM card in a mobile phone and try the web browser to test this.
Disable the PIN code control on the SIM card. You can insert the SIM card in a mobile phone and follow the instructions in the phone manual to do this.
Disconnect the battery when you insert your SIM card into the device.
Write down the IMEI number of your device, it is found inside the battery compartment.
Make sure the battery is charged, turn the device on and place it where you have a good GPS signal, e.g. in a window or outdoors.
* NOTE! device user name must be set to "username" and device password must be set to "0000". Those are the default values on a new Sanav device.
Prepare your device.
Please go through the following preparation steps to make your Sanav MT-101 device ready for configuration.
Check the credit on your SIM card and verify that GPRS has been activated by your telecom operator. Insert your device SIM card in a mobile phone and try the web browser to test this.
Disable the PIN code control on the SIM card. You can insert the SIM card in a mobile phone and follow the instructions in the phone manual to do this.
Disconnect the battery when you insert your SIM card into the device.
Write down the IMEI number of your device, it is found inside the battery compartment.
Make sure the battery is charged, turn the device on and place it where you have a good GPS signal, e.g. in a window or outdoors.
* NOTE! device user name must be set to "username" and device password must be set to "0000". Those are the default values on a new Sanav device.
Step 3.
Enter the required device information.
When you have completed step 1 please enter the information below to configure your device.
Device IMEI number:
Error: Invalid IMEI number
Device phone number:
(Error: Invalid phone number
(With "+" and country code eg. +4670...)
Country:
Your telecom operator:
Error: You must choose an operator (or manually specify APN)
Fill in the information for your VehicleTracker trial account.
Select the username you would like to have and enter your email address.
Username:
Error: Invalid username
E-mail:
Your login information for your VehicleTracker account will be sent to the email address you enter, so please make sure your e-mail adress is correct!
Account created! check your e-mail for login passwordError: Username already existsError: The device already existsError: E-mail could not be sentError: Device configuration failedError: Unknown error. Possibly network failure
Note: The inital setup will request your device to send SMS messages to Sweden (+46 ...). For the trial your device will be setup to track over GPRS with one minute update intervals generating approximately 10 kilobytes of GPRS traffic per hour. Naturally you can turn off your device and reconfigure it at any time.
You should be aware of the fact that tracking will incur data traffic and SMS costs. These costs are handled by you.
Track your SANAV device in a matter of minutes with thisguide!
Please go through the following preparation steps to make your Sanav CT-24 device ready for configuration.
Please go through the following preparation steps to make your Sanav CT-58 device ready for configuration.
Please go through the following preparation steps to make your Sanav CT-58A device ready for configuration.
Please go through the following preparation steps to make your Sanav GC-101 device ready for configuration.
Please go through the following preparation steps to make your Sanav GX-101 device ready for configuration.
Please go through the following preparation steps to make your Sanav MT-101 device ready for configuration.
GPS Tracking